Welcome Guest [Log In] [Register]
Welcome to Ragnarok Support Board. We hope you enjoy your visit.


You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.


Join our community!


If you're already a member please log in to your account to access all of our features:

Username:   Password:
Add Reply
Router Guides; For Your Mu Server
Topic Started: Nov 4 2004, 10:28 PM (99 Views)
allen2003
Member Avatar
Administrator
Admin
0.97 Server for Router users (This serverguide was made by the info posted by DOT-_-, M!st!que, Ether_Man and Trout (THANK YOU SO MUCH MY SERVER WORKS :P...... Boko)

Stuff needed
1. MSSQL Server (I use SQL 2000 server(Evaluation), the link is at www.dwtuning.lv/mu)
2. 0.97 server files (Link: http://mu.clan.gr/modules.php?op=mo...eq=getit&lid=15)
Password: ragezone (Note: Sometimes Gameserver gives error with these server files. When you get error try downloading other server files from this forum. I wil add server files here soon)
3. 0.96y client full (Link: http://mu.clan.gr/modules.php?op=mo...req=getit&lid=2)
4. 0.97 client patch (Link: http://mu.clan.gr/modules.php?op=mo...req=getit&lid=3)
5. 0.97 english patch (Link: http://mu.clan.gr/modules.php?op=mo...req=getit&lid=7)
6. MuReg (Program that makes accounts)(Link: http://www.dwtuning.lv/mu/_mureg.zip)
7. Launcher (Link: http://mu.clan.gr/modules.php?op=mo...req=getit&lid=9)

-----

Setting up SQL


Run SQL Setup
Select "SQL Server 2000 Components"

1. Click "Install Database Server"

2. Click Next

3. Select "Local Computer" and click Next

4. Select "Create a new instance of SQL Server,or install Client Tools" and click next

5. Put name and company and click Next

6. Click Yes to Agreement

7. Select "Server and Client Tools" and click Next

8. Select Default at the top of the screen (So that there is a mark in the little box) and click Next

9. Select "Typical" and click Next

10. Select "Use the same account for each service. Auto start SQL Server Service"

11. In the same screen also select "Use the Local System account" and then click Next

12. Select "Windows Authenticatication Mode." and click Next

13. Click Next and install

When installed reboot your computer so the server starts.

-----

Restoring Database

1. Unzip the server files I gave you in c:\muserver\

2. Open Enterprise Manager (Start -> Programs -> Microsoft SQL Server -> Enterprise Manager) and go to Databases.

3. Create a new database and name it MuOnline.

4. After that, right click on muonline database then click "All tasks" and then "Restore Database".

5. Click on "From Device" and then click on "Select Devices".

6. Click Add and then type in the filename of the database (Which is: c:\muserver\db baks\MuOnline).

7. Press OK 2 times to continue, then press the Options tab.

8. Tick the "Force restore over existing database" box and check that the database files pointed below are set to the c:\MuServer\DB\ directory (If it's D:\ you will have to change it to C:\).

9. Press OK to import the database.

10. Create another database, name it Ranking and do the exact same thing as you did with the MuOnline Database, only you now have to select the Ranking Database (Which is: c:\muserver\db baks\Ranking).

-----

Adding Accounts

1. In the Enterprise Manager go to Security and then Logins.

2. Right click "sa" and click Properties.

3. Set the password to anything you want (Remember the password though) and change the default Database to MuOnline.

4. Unzip your _mureg.zip file and load mureg.exe

5. Type in your username (sa) and your password (The password you entered just now in the Enterprise Manager).

6. Select the New Account Tab and create a new account.

-----

System DSN

1. Start Data Sources (ODBC) (Start -> Programs -> Administrative Tools -> Data Sources (ODBC)), go to System DSN tab then click Add.

2. Select the SQL Server driver(bottom) and click Finish. Choose MuOnline for Name and your SQL Server for Server.

3. Change the default database to muonline and click Next then Finish and OK.

4. Create also 12 more System DSN links named MuOnlineJoinDB, Event, USELOG, ACCOUNTDB_INFO_START, GAMEDB_INFO_END, GAMEDB_INFO_START, LOGINDB_INFO_START, MUMNGDB_INFO_START, SERVERINFO_START, USELOGDB_INFO_START, ExDB and Munonline ExDB that uses MuOnline as the default database.

5. Create 1 System DSN named DEVILSQURE_RANKING that use Ranking as the default database.

-----

Editing IP Address and Setting up Server Files

1. Go to www.whatismyip.com

2. Change all the ip addresses found in config files to the IP adress you see in www.whatismyip.com (this is your Global IP)
All Ip adresses in the following files must be changed to this Global IP Address:

C:\muserver\CS\Connectserverlist.dat
C:\muserver\CS\data\Connectserverlist.dat
C:\muserver\CS\data\ServerList.dat
C:\muserver\data\IpList.dat
*C:\muserver\data\lang\eng\commonloc.cfg
*C:\muserver\data\lang\kor\commonloc.cfg
*C:\muserver\data\lang\tai\commonloc.cfg
*C:\muserver\data\lang\chs\commonloc.cfg

(*may not apply to all)

3. Go to Start -> Run and type in "cmd". It will load a command prompt. Type ipconfig /all in command prompt to check your ip adress (This is your Computer IP).

4. Change all Ip adresses in the following file (There are 3 IP adresses in this file) to your Computer IP: C:\muserver\data\commonserver.cfg

5. Change the IP Addresses found in 4.lnk and 8.lnk in the c:\muserver\Links folder(right click on them and select properties) to your Computer IP.

-----
Setting up your router

1. Go to Start -> Run and type in "cmd". It will load a command prompt. Type ipconfig /all in the command prompt. Below your IP adress is your subnetmask and below that your Standar Gateway. You'll have to type the number behind your Standard Gateway in your browser.

2. You need the login and password for your router. If you don't know it you will need to find your router's manual. There is always a standard Login and Password in there. If you somehow can't find it try login: admin and password: admin. If you can't get into your router than I'm sorry you can't get your own server.

3. After you connect to your router you will have to select Virtual Server. Once there you can forward ports in your router (Or else people can't connect). Forward the following ports to your Computer IP:


* 44405 TCP
* 55557 UDP
* 55970 TCP
* 55971 TCP
* 55960 TCP
* 55961 TCP
* 55962 TCP
* 55557 TCP
* 55901 TCP

4. Make sure you save your changes in your router or it won't work.

5. You need to add a loopback device to your computer. Go the your control panel in windows, start the Add new hardware guide and install the microsoft loopback device.. (in the network cards section).

6. Once installation is finished go to control panel and select Networkconnections (Or something similar). Right click your Microsoft Loopback Adapter Connection, and select Properties. Select your Internet-protocol (TCP/IP) and click Properties.

7. Set the IP-Adress to your Global IP.

8. The subnetmask is not the same for everyone. Set it to 255.255.255.254. If you press ok and it gives an error try 255.255.255.253 and if that gives an error try 255.255.255.252 and so on till it doesnt give an error anymore.

-----

Connecting to your Server

There are several ways to connect to your Server, but the best thing is using a launcher (That's what I think):

1. Unzip the 0.96y client full in a new folder (Make one yourself)

2. Unzip the 0.97 patch in the same folder

3. Unzip the 0.97 english patch in Data/Local folder (In the folder you made)

4. Unzip the launcher in the folder you made (same folder as 0.96y and 0.97 patch)

5. Run launcher 2.exe. Name = Your Server Name, Host = Your Global IP, Version = 0.97 (Until you've updated the server of course), port = 44405

-------------------------------------------------------------------------------------------

If you are having problems with your server try this guide and it might work, because I did exactly everything in this guide and my server works now.

If you have any questions pm me or ask me on MSN

Boko

(AGAIN THANK DOT-_-, M!st!que, Ether_Man AND Trout BECAUSE I COULDNT HAVE DONE IT WITHOUT THEM, YOU GUYS ARE THE BEST )

(I TAKE NO CREDIT FROM THIS GUIDE, THIS GUIDE IS ALL THX TO THE PPL ON THIS FORUM, THANK YOU RAGEZONE!!!)

--------------------
Offline Profile Quote Post Goto Top
 
« Previous Topic · Mu Online Emulators And Others · Next Topic »
Add Reply