| WIP Doomflayer project; using stank, volleygun & doomwheel bitz | |
|---|---|
| Tweet Topic Started: 7th March 2010 - 03:02 PM (819 Views) | |
| scrivener | 7th March 2010 - 03:02 PM Post #1 |
![]()
*toot*
![]()
|
I call this little fella Skurj & Flensre's Multicombination Eviscerator. Getting it to fit a cavalry base was probably the hardest part. The main parts are done now, just got to add some extra assessories and blades onto the wheels and the front propeller. Also haven't made up my mind if the driver's new head fits his body (that doomwheel driver seems beefier than average for a skaven).
|
| |
![]() |
|
| UnderTheEarth | 7th March 2010 - 03:12 PM Post #2 |
![]()
Grey Seer Scabrac
|
![]() simply astounding, amazing conversion and model scriv! Can't wait to see how it turns out! |
![]() |
|
| BloodStream | 7th March 2010 - 04:11 PM Post #3 |
|
Clanrat
|
I'm not sure why, but that Doomflayer really makes me laugh. It looks brilliant, and I'm betting it'll look a bazillion times better with blades coming from all directions. Keep us updated! I love these Doomflayer threads. <3 |
![]() |
|
| Skreetz the Fabricator | 7th March 2010 - 05:30 PM Post #4 |
|
Skyre warlock/converter
|
I think the new head looks like it sticks out a bit to much. Perhaps cutting off a bit of the neck area should work. I love the idea, so I will take three ![]() But what bits are from what (so I know what to bits order) |
![]() |
|
| scrivener | 7th March 2010 - 10:41 PM Post #5 |
![]()
*toot*
![]()
|
The board that everything is sitting on is the bottom part of a volleygun chassis, I cut it short and used the end half to make the frame that holds the top wheels and gears. The bunch of gears in the frame is also from the volleygun. The top wheels with the axle and pistons is from the steam tank, the pistons are connected with a styrene tube and part of the flint-wheel from disposable lighters (you can see the setup in the 4th pic, the flint-wheels are the black round things). The whole back section is from the doomwheel, rearranged. I replaced the heads to make them look a little different. The propeller and the front wheels are from the furnace kit, the propeller has the rim cut off so I can stick blades onto the spokes. I'm tossing up on whether to do the same with the top wheels. The propeller's rod is a styrene tube (held in place by a ring made from a larger styrene tube) and tipped with another cog part from a lighter's wheel-flint (visible in the 4th photo) which serves as a socket for the propeller. The shield is an empire state troops shield with the icon cut off and replaced with the zigzag spike from the doomwheel. I've also got three more lever things from the volleygun to stick in a few places. |
| |
![]() |
|
| scrivener | 9th March 2010 - 01:34 PM Post #6 |
![]()
*toot*
![]()
|
Got the blades attached now. It does make me think of Chaos stars...![]() Here's the internal mechanisms behind the wheels: ![]() And the wheels attached (thumbnails): ![]() |
| |
![]() |
|
| Lord Lughtigern | 9th March 2010 - 01:39 PM Post #7 |
![]()
The Mad Ratter.
![]()
|
Quite neat Scriv, it really looks cool. Props on the unique work!
|
![]() Links you should try out: Denizens of the Deep - Rules for Underground Campaigns Warhammer Skirmish - The Lazy Man's Mordheim | |
![]() |
|
| Viskis | 10th March 2010 - 08:57 AM Post #8 |
|
Stormvermin
|
Very nice use of all those seperate parts! |
| You only get one chance to make a last impression... | |
![]() |
|
| Bobtailmaneater | 10th March 2010 - 05:23 PM Post #9 |
|
Grey Seer
|
My hat is off to you, sir!
|
![]() Bobtail's links: *My Sculpting and Converting Blog on UE *My Article on the Skaven Runic Alphabet | |
![]() |
|
| UnderTheEarth | 11th March 2010 - 03:44 AM Post #10 |
![]()
Grey Seer Scabrac
|
I wish i could convert so well ...I want one
|
![]() |
|
| « Previous Topic · Skaven Painting and Hobby · Next Topic » |
























