| Conversions for Eshin Sorcerors | |
|---|---|
| Tweet Topic Started: 1st September 2005 - 08:19 PM (243 Views) | |
| Skriggit the Rat Ninja | 1st September 2005 - 08:19 PM Post #1 |
|
Unregistered
|
Hey, since I'm starting my new Eshin army I've been thinking about the conversions for certain models. One thing that came up was how to convert the Sorcerats. What does everyone here use for their Sorcerats? Also, I've heard people saying they us the Deathmaster Snikch model for their Master Assassin, where could one find this model? |
|
|
| Morkskittar | 1st September 2005 - 08:24 PM Post #2 |
![]()
The Tunnel's Resident Rodent Ecologist
![]()
|
GW Online Store, in the Archive model section. I believe that there is an Eshin Sorceror model in the Mordheim range, but don't quote me. You could also base your sorc on a Grey seer... |
|
The Eldritch Wastes: A Post-Lovecraftian Online Serial Novel (Author Website) Pub Fight Deaths: 334. Pillz and Pyllz are © by Morkskittar. ![]() Complete Works of Morkskittar / You Have Just Lost the Game 'zodi | |
![]() |
|
| fibonacci | 1st September 2005 - 08:32 PM Post #3 |
|
Stormvermin
|
There is an eshin sorcerat in the Morheim line. You can get Deathmaster here: http://store.us.games-workshop.com/storefr...&GameNav=301115 |
![]() |
|
| Morkskittar | 1st September 2005 - 08:44 PM Post #4 |
![]()
The Tunnel's Resident Rodent Ecologist
![]()
|
If you are not from the US, just go to your country's online store for it, as opposed the provided link to the US one. |
|
The Eldritch Wastes: A Post-Lovecraftian Online Serial Novel (Author Website) Pub Fight Deaths: 334. Pillz and Pyllz are © by Morkskittar. ![]() Complete Works of Morkskittar / You Have Just Lost the Game 'zodi | |
![]() |
|
| dublinlaxd | 1st September 2005 - 10:31 PM Post #5 |
|
Stormvermin
|
I Field off the horns of a grey seer then put a mask on him with green stuff and then stuck an old Lizardmen shield on his head like a hat. My other one is the other grey seer and I replaced his head with a mased night runner then put a hat on him too. Got the idea from the Gw site. It actually looks pretty good. |
![]() |
|
| Warlord Gnashik | 1st September 2005 - 10:52 PM Post #6 |
|
Backing Veer-myn Dreadball teams!
|
One of my Sorcerers is a Grey Seer like dublinlaxd's. I got the idea from the GW site too. My other one is a Warlock Engineer from the last edition, the one holding a skull in the air. For my third one I'd like to get a different OOP WE. For now I am using my Mordheim sorcerer. However, he is just a converted plastic NR. The only thing I did to make him stick out is paint his clothes red. |
![]() | |
![]() |
|
| Skriggit the Rat Ninja | 2nd September 2005 - 01:33 AM Post #7 |
|
Unregistered
|
Do you think you could give a link to the site where you found information on making the hat for the Sorcerat? |
|
|
| dublinlaxd | 2nd September 2005 - 01:57 AM Post #8 |
|
Stormvermin
|
http://us.games-workshop.com/games/warhamm...ven/default.htm thats where i got it |
![]() |
|
| Rusty Tincanne | 2nd September 2005 - 02:23 AM Post #9 |
![]()
...you can still call me Rusty Tincanne if you want, though.
![]()
|
I am using a mordheim sorceror, but in retrospect I wouldn't have. It feels wrong to have a sorceror w/o a cloak or robes. The assassins and DMSnitch have cloaks, while the PWG's and Jezzails all wear robes. Even some of the NRs and GRs have cloaks. Why doesn't the sorceror. (Am I too cliche here?) I suppose I'll use a NR cloak and green stuff to convert it eventually. I was also thinking that the older chieftain models would do well as a sorceror, perhaps. |
![]() |
|
| Tilara | 2nd September 2005 - 05:24 AM Post #10 |
|
Grey Seer
|
I use the Mordheim Eshin Sorcerer for one and this guy (on the left) for the other. I made him using one of the old engineer model holding a halberd. I clipped off blade of halberd and put the top of a standard bearer's staff and a little dagger on it, gave him a nightrunner's cloak that was slightly reshaped, and a little greenstuff mask. |
![]() |
|
| Skriggit the Rat Ninja | 2nd September 2005 - 07:00 PM Post #11 |
|
Unregistered
|
kool thanks |
|
|
| Boilrot the infectious | 2nd September 2005 - 07:34 PM Post #12 |
|
Clanrat
|
i did this for kicks. combined the goblins sprue with the clan rat and night runner sprue, i used a night runner model used the banner bearer arm cut it down to size placed a large skull, i think its an orc banner icon, then used the goblin arm holding a head and presto. i also added some hands from the warhammer command sprue 98. |
![]() |
|
| « Previous Topic · Skaven Discussion · Next Topic » |











