Welcome Guest [Log In] [Register]
Welcome to Oklahoma Vw Cruisers. We hope you enjoy your visit.


You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.


Join our community!


If you're already a member please log in to your account to access all of our features:

Username:   Password:
Add Reply
side window installation; how do i get them in
Topic Started: Nov 28 2007, 07:09 PM (341 Views)
hippy freek
Member Avatar
hippie freek
[ *  *  * ]
ok does anyone know how to get the roll up windows and rubber back in?

i had to get my truck back from a person who was working on it and everything was in a million pieces and im still trying to figure out where everything went. most of its not that hard but i have to figure out the wireing because it wont start and the wipers had been pulled but thats for another discussion...

i have pulled the stuff out of one of my old vans but i have never put any of the rubber back in... everything is out of the window (had to be painted) so i need to start from step one... if anyone can give me a step by step it would be greatly appreciated...

thanks
mike :ph43r:
Offline Profile Quote Post Goto Top
 
vdubjim
Member Avatar
Administrator
[ *  *  * ]
isint there clips that hold the channel in and the window would go in through the door panel area and bolt to the mechanism?
Offline Profile Quote Post Goto Top
 
BAM
Member Avatar
Advanced Member
[ *  *  * ]
It will start if you run a ground wire to the ford solenoid in the engine compartment.
Offline Profile Quote Post Goto Top
 
hippy freek
Member Avatar
hippie freek
[ *  *  * ]
finaly got it started, had to take the ford thing out and rewire it correctly. all the wires were wrong. got new vent windows because the ones that were in there had been torn apart and werent going to work in the time that i have left. i have 10 days before i leave for my trip and i got the thing running and finaly got the doors on and changed out some motor stuff.. i just have to get the front window in and figure out how to get the side windows in. going to be quite a job.

on the other section where you talk about experiencs and dealings with people is where im going to talk the trash i need to talk about BAM (brandon) so look there if you want to find out what i am having to deal with.

hippie
Offline Profile Quote Post Goto Top
 
BAM
Member Avatar
Advanced Member
[ *  *  * ]
hippy freek
Dec 18 2007, 07:22 PM
finaly got it started, had to take the ford thing out and rewire it correctly. all the wires were wrong. got new vent windows because the ones that were in there had been torn apart and werent going to work in the time that i have left. i have 10 days before i leave for my trip and i got the thing running and finaly got the doors on and changed out some motor stuff.. i just have to get the front window in and figure out how to get the side windows in. going to be quite a job.

on the other section where you talk about experiencs and dealings with people is where im going to talk the trash i need to talk about BAM (brandon) so look there if you want to find out what i am having to deal with.

hippie

the "ford thing" was there when you brought it to me. I'll see you on the other thread. talk all the crap you want. I got email's and pics of that piece of crap and the $ you payed.
Offline Profile Quote Post Goto Top
 
« Previous Topic · Tech Talk · Next Topic »
Add Reply